Installation Guide

4
ASSEMBLY INSTRUCTIONS
1. Remove the canopy screws (E) from the canopy (D)
to expose the mounting plate (B). Loosen the
track mounting screws (A) preassembled to the
mounting plate (B). Note: Do not remove the track
mounting screws (A) completely.
1
E
D
B
A
2
2. Connect the wires (white wires from connector
to the white wires from the supply circuit, black
wires from the connector to the black wires from the
supply circuit, and the green ground wire from the
connector to the ground wire of the supply circuit)
using the wire connectors (DD). Wrap electircal tape
(not included) around wire connectors (DD) and be
sure they are secure. Push all excess wire and
wire connectors (DD) back into the outlet box
(not included).
DD
Outlet Box
Hardware Used
DD
x 3
Wire Connector
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly (not included): Wire stripper, Phillips screwdriver, Electrical tape, Drill,
7/32 in. drill bit, 5/8 in. drill bit, measuring tape, ladder and pencil.
Helpful tools (not included): Gloves
Lowes.com