Installation Guide

8
WARRANTY
The manufacturer warrants this lighting fixture against defects in materials and workmanship for a
period of one year from the date of purchase. If within this period the product is found to be
defective in material or workmanship, the procudt must be returned, with a copy of the bill of sale
as proof of purchase, to the original palce of purchase. The manufacturer will, at its option, repair,
replace or refund the purchase price to the original purchaser consumer. This warranty does not
cover light bulbs or the fixture becoming damaged due to misuse, accidental damage, improper
handling and/or installation and specifically excludes liability for direct, incidental or consequential
damages. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply. This warranty gives you specific rights and you may also
have other rights that vary from state to state.
REPLACEMENT PARTS
For replacement parts, call our customer service department at 1-866-389-8827, 8 a.m. - 6 p.m
EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
Printed in China
AA
CC
DD
EE
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Light bulb will not illuminate.
1. Light bulb is burned out.
2. Power is off.
3. Incorrect wiring.
4. Faulty light switch.
5. Connector or track head
may be installed improperly
.
1. Replace light bulb.
2. Make sure power supply
is on.
3. Check wiring connection at
power source and at track
power feed.
4. Test or replace light switch.
5. Check the connections for
proper installation.
Blown fuse or tripped circuit
breaker when fixture is
turned on.
1. Incorrect wiring. 1. Check wiring connection at
power source and at track
power feed.
CARE AND MAINTENANCE
● Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker
off or removing the fuse from the fuse box.
● To clean the fixture, use a dry or slightly dampened clean cloth.
● DO NOT use any cleaners with chemicals, solvents, or harsh abrasives as damage to the fixture
may occur.
● DO NOT touch new bulb with bare hands as oil from skin may damage the lamp and cause
short bulb life.
● Bulb replacement: Use 50-watt max., 120-volt GU10-base bulb.
H
PART DESCRIPTION PART #
H
Bulb
0372825-H
AA
Toggle bolt
0372825-AA
BB
Phillips screw
0372825-BB
CC
Anchor
0372825-CC
DD
Wire connector
0372825-DD
EE
Machine screw
0372825-EE
FF
FF
GG
End cap
Suction cup
0372825-FF
0372825-GG
GG
BB
Lowes.com
Project Source is a registered trademark of LF, LLC. All rights reserved.
®