Manual

CHARGING INSTRUCTIONS

STEP 1 – CHECK THE ELECTROLYTE LEVEL

Priortochargingthebattery,removetheventcapsandchecktheelectrolytelevel(not

requiredonsealed&maintenancefreebatteries).Theelectrolyteshouldbe6mm(1/4”)

abovethebattery’splates.Iflow,topupwithdistilledwatertothecorrectleveland

refittheventcaps.

STEP 2 – CONNECT TO BATTERY

Therearethreeoptionsforconnectingtobattery.

Step2A–Connectingtoabatterythatisoutofthevehicle

Step2B–Connectingtoabatteryfittedtoavehicle

Step2C–Permanenthardwiringconnectiontoabattery

STEP 2A – BATTERY OUT OF VEHICLE

ConnecttheREDlead(batteryclip)fromthechargertothePositive(+)batterypost.

ConnecttheBLACKlead(batteryclip)fromthechargertotheNegative(-)batterypost.

12V 35A 7-St age

POWER ON

BULK CHARGE

ABSORPTION

FULLY CHARGED

VOLTS/AMPS

CHARGE RATE BATTERY TYPE RECONDITION

OFF

Connection out of vehicle