Manual

5
CHARGE STATUS INDICATOR
The CHARGING and FULLY CHARGED LEDs will illuminate and flash in various patterns
to indicate the different stages of charging. See below for flash patterns.
CHARGING LED: blue LED illuminates and flashes during charging process.
FULLY CHARGED LED: green LED illuminates (solid) when fully charged.
POLARITY PROTECTION
Prevents the output leads from sparking due to accidental reverse connection or short
circuit making the charger safer to use around batteries.
OVER TEMPERATURE PROTECTION
If the temperature within the charger rises too high, the charger will begin to cool down
by turning on the fan, and if the temperature continues to rise it will begin reducing the
power output. If still unsuccessful, the charger will shutdown until it cools down.
SWITCHMODE TECHNOLOGY
Using the latest technology in battery chargers, switchmode chargers convert 240VAC
power to 12VDC power using electronic components unlike traditional battery chargers
that rely on heavy transformers. This allows the charger to be lightweight and compact
without sacrificing on performance.
COOLING FAN
The charger is fitted with a thermostatically controlled fan to cool onboard electronics
and maintain charging performance. The cooling fan will engage automatically when
there is a high load on the battery or there is sufficient heat build up.
REMOTE CONTROL DISPLAY*
Control and monitor the charger’s performance from a remote control display, allowing
the charger to be flush or surface mounted out of the way and out of sight. The battery
charger and remote are synchronised for operation either locally or by remote.
* Available as optional extra for P/No. IC1500 only, not supplied with unit but can be
purchased separately (P/No. ICREMOTE)
Absorption/
Desulphation Soft Start Bulk Equalisation Analyse Recondition Float
Red LED Power
Blue LED Charging
Green LED Full
(Fast Flash) (Slow Flash)