Operation Manual

EN-5
Note: The alarm will come on again at the set time on the following days when the function
selector is set to the AUTO position.
Snooze control
The radio or buzzer alarm can be muted for approximately 9 minutes by pressing the
Snooze button. This sequence can be repeated until the AL Set button is pressed or the
function selector is set to the OFF position during the alarm period of 1 hour and 59
minutes.
SETTING THE SLEEP TIMER
Before setting the sleep timer, make sure to tune in the desired station (see
“OPERATING THE RADIO”).
1. Slide the function selector to the OFF or AUTO position.
2.
Press and hold the Sleep button and set the desired sleep time by repeatedly
pressing the Hour Set and Minute Set buttons until you reach the desired length of
time you wish the radio to play. You can set the sleep time from 1 minute to 1 hour
and 59 minutes.
3.
The radio will automatically turn off when the sleep time has elapsed.
4.
To turn the radio off before the preset sleep time has elapsed, press the Snooze
button.
SPECIFICATIONS
POWER REQUIREMENTS
Mains AC 230 volts, 50Hz~
Back-up Battery 1 x 9V battery (not supplied)
FREQUENCY COVERAGE
FM 87.5 – 108 MHz
AM 522 – 1620 KHz
CARE AND MAINTENANCE
1. Unplug the unit from the mains socket before cleaning.
2. Do not immerse the mains plug into water or other liquid.
3. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
4. Keep your unit away from heating appliances and sources of electrical noise such
as fluorescent lamps or motors.
5. For better Clock Display clarity, avoid operating the unit under direct sunlight or in
strong room illumination.
6. Clean the unit with a damp cloth. Solvent or detergent should never be used.
Downloaded from www.vandenborre.be