Manual

PROLiNK
®
H5004N User Manual www.prolink2u.com
Version 1.00 (Jan’10) 23
4.4 Services Configuration
4.4.1 DHCP Mode
You can configure your network and DSL device to use the Dynamic Host Configuration
Protocol (DHCP). This page provides DHCP instructions for implementing it on your
network by selecting the role of DHCP protocol that this device wants to play. There are
two different DHCP roles that this device can act as: DHCP Serve and DHCP Relay.
When acting as DHCP server, you can setup the server parameters at the DHCP Server
page; while acting as DHCP Relay, you can setup the relay at the DHCP Relay page.
4.4.2 DHCP Server Configuration
By default, the device is configured as a DHCP server, with a predefined IP address pool
of 192.168.1.64 through 192.168.1.253 (subnet mask 255.255.255.0).
Fields in this page:
Field Description
IP Pool Range Specify the lowest and highest addresses in the pool.
Max Lease Time
The Lease Time is the amount of time that a network user is allowed to maintain
a network connection to the device using the current dynamic IP address. At the
end of the Lease Time, the lease is either renewed or a new IP is issued by the
DHCP server. The amount of time is in units of seconds. The default value is
86400 seconds (1 day). The value –1 stands for the infinite lease.
Domain Name
A user-friendly name that refers to the group of hosts (subnet) that will be
assigned addresses from this pool.