Owner's manual

103
CHAPTER 7. ROUTER SPECIFICATION
Load Balance Broadband Router v656
Specification Features Remark
Hardware
WAN Port
- 4*10M/100M port
- 2*10M/100M port
- Auto -sensing (RJ-45)
- 802.3/802.3u, auto MDI/MDIX
LAN Port - 1 *10 M/100 M - Auto -sensing (RJ-45)
- 802.3/802.3u, auto MDI/MDIX
CPU - MIPS with 150MHz
Memory - Flash: 2M bytes
- SDRAM: 16M bytes
4*WAN 2*WAN
Indicator (5 LEDs)
- LAN
- WAN1
- WAN2
- WAN3
- WAN4
- LAN
- WAN1
- WAN2
- POWER
- ALARM
Reset Switch
- Push to load factory default value
Power
- DC 5V/2.8A - External Switching Power
Adapter with full range
110v~220v AC input
Software
Outbound
Load Balance
Provide 3 working mode
- Session
- Weight round robin
- Traffic
Protocol
- TCP/IP, UDP
- ARP, BOOTP
- ICMP
- Routing Protocol
- DHCP server/client
- FTP, TFTP
- Telnet
- PPPoE
VPN pass through
- IPSEC
- PPTP
- L2TP
Routing Protocol
- Static Route
- RIP 1
- RIP 2
Dynamic DNS
- Support dyndns.org