Owner's manual

91
5.11.9 Mail Alert
- Gateway Mode / Basic NAT Mode only -
Enter the Receiver/ Sender e-mail Address in the fields and check the
items you want. System will send e-mails to Receiver address once the
conditions meet the setting.
Receiver mail address: The mail address that will receive alert mail
Sender mail address: The mail address that send out alert mail, you
Should fill in a legal format address
(ex . [e-mail] )
Example 1
When “log record “ is 50, means when condition happen 50 times. The
router will send 50-log message together to Receiver.
Example 2
When “log record “ is 1, means when each condition happen. The router will
send log message to Receiver every time.
“log record” range : 1~150.
Broadband Router provides four condition selections:
WAN Up System will send the mail, once WAN port(s) is connected to
Internet.
WAN Down System will send the mail, once WAN port(s) is disconnected
from Internet.
DoS Attack System will send the mail, once the selected is conditions in
DoS occurred.( need to enable DoS function)
System log System will send the mail of log information, once the log
records conform to your setting.