User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com

Version 1.00 10 English

Item / Function

Descriptions / Instructions

WAN Access Type

Select the WAN Access Type Static IP, DHCP Client, PPPoE, or Mobile Networks from the pull-down list. Default

setting is DHCP (Auto Config) enabled.

DHCP Client

If the DHCP Client be selected, the computer will obtain the IP address automatically.

Hostname: Enter the hostname that assigned IP address to your computer in this field. Maximum input is 32

alphanumeric characters (case sensitive).

MTU Size: The most appropriate MTU (Maximum Transmission Unit) namely the maximum packet size, the default

value is 1492 for your application. Reducing the packet size can help connecting to certain web sites or speeding up

packet transfer rate. If the incorrect packet size is entered, you may not be able to open certain web sites.

Select to Attain DNS Automatically or select Set DNS Manually to set the DNS server IP address at the following

DNS 1~3 columns. Default setting is Attain DNS Automatically.

DNS 1: Enter the DNS server IP address (es) provided by your ISP, or you can specify your own preferred DNS server

IP address (es).

DNS 2~3: This servers are optional. You can enter another DNS server’s IP address as a backup. DNS 2 and 3 servers

will be used when the DNS 1 server fails.

Static (Fixed IP)

If the Static IP be selected, user have to set up the IP address, subnet mask and default gateway according to the ISP

(Internet Service Provider) that provide the related information.

IP Address: Enter the WAN IP address provided by your ISP here.

Subnet Mask: Enter the subnet mask here.

Default Gateway: Enter the default gateway IP address provided by your ISP here.