User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 15 English
3.5.
Basic
Item / Function
Descriptions / Instructions
Disable Wireless
LAN Interface
Check to disable the wireless function. If the wireless LAN interface be disabled, the WLAN LED on the front LED will
be off.
Band
You can choose one mode of the following you need.
 2.4GHz (B): 802.11b supported rate only.
 2.4GHz (G): 802.11g supported rate only.
 2.4GHz (N): 802.11n supported rate only.
 2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.
 2.4GHz (G+N): 802.11g supported rate and 802.11n supported rate.
 2.4GHz (B+G+N): 802.11b, 802.11g and 802.11n supported rate.
The default is 2.4GHz (B+G+N) mode.
Mode
Under Router operation mode, user can select AP, WDS, and AP+WDS from the pull-down list. For AP mode, user can
select AP, Client, WDS and AP+WDS mode. Under client mode, there is only Client mode can be selected.
Multiple APs
This page shows and updates the wireless setting for multiple APs.
PROLiNK_WNR1008