User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 19 English
Authentication Mode: Select Enterprise (RADIUS) or Personal (Pre-Shared Key) mode.
WPA Cipher Suite: here supported AES only.
WPA2 Cipher Suite: here supported AES only.
Pre-Shared Key Format: There are two formats for choice to set the Pre-shared key, Passphrase and
Hex (64 characters). If Hex is selected, users will have to enter a 64 characters string. For easier
configuration, the Passphrase (at least 8 characters) format is recommended.
Pre-Shared Key : Pre-Shared Key serves as a password. Users may key in 8 to 63 characters string if you
selected passphrase. Pre-shared key format to set the passwords or leave it blank, in which the 802.1x
Authentication will be activated. Make sure the same password is used on client's end.
ACL
Item / Function
Descriptions / Instructions
Wireless Access
Control Mode
Select Allow Listed or Deny Listed form the pull-down menu to enable access control function. Default setting is
Disabled.
MAC Address
Enter the MAC address (12 characters) of a station that is allowed to access this Access Point.
Comment
You may enter up to 20 characters as a remark to the previous MAC address.
Current Access
Control List
This table displays you the station MAC information.
Delete Selected
Click Delete Selected to delete items which are selected.
Delete All
Click Delete All to delete all the items.
Reset
Click Reset to rest.