User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 26 English
Item / Function
Descriptions / Instructions
Enable MAC Filtering
Check to enable MAC filtering function.
MAC Address
Enter the client MAC address in the field.
Comment
You may key in a description MAC address.
Apply Changes
After completing the settings on this page, click Apply Changes button to save the settings.
Reset
Click Reset button to restore to default values.
Current Filter Table
Shows the current MAC filter information.
Delete Selected
Click Delete Selected button to delete items which are selected.
Delete All
Click Delete All button to delete all the items.
Reset
Click Reset button to rest.
Port Filtering Settings
Item / Function
Descriptions / Instructions
Enable Port Filtering
Check to enable Port Filtering function.
Port Range
Enter the beginning of the range of port numbers used by the service. If the service uses a single port number, enter
it in both the start and finish fields.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system or service.
Comment
You may key in a description MAC address.
Apply Changes
After completing the settings on this page, click Apply Changes button to save the settings.
Reset
Click Reset button to restore to default values.
Current Port
Forwarding Table
Shows the current Port Forwarding information.
Delete Selected
Click Delete Selected button to delete items which are selected.
Delete All
Click Delete All button to delete all the items.
Reset
Click Reset button to rest.