User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 27 English
IP Filtering
Item / Function
Descriptions / Instructions
Enable IP Filtering
Check to enable IP filtering function.
Local IP Address
Enter the local server’s IP address.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system or service.
Comment
You may key in a description for the port range.
Apply Changes
After completing the settings on this page, click Apply Changes button to save the settings.
Reset
Click Reset button to restore to default values.
Current Filter Table
Shows the current IP filter information.
Delete Selected
Click Delete Selected button to delete items which are selected.
Delete All
Click Delete All button to delete all the items.
Reset
Click Reset button to rest.