User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 39 English
4. Click on the Properties button. You should then see a screen like
the following.
5. Ensure your TCP/IP settings are correct.
Using DHCP
 To use DHCP, select Obtain an IP address automatically and Obtain DNS server address automatically.
This is the default Windows setting. Using this is recommended. By default, the Wireless Router will act as a
DHCP Server.
 Restart your PC to ensure it obtains an IP address from the Wireless Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following changes.
 In the Default gateway field, enter the Wireless Router's IP address. Your LAN administrator can advise you of
the IP address they assigned to the Wireless Router.
 If the DNS Server fields are empty, select Use the following DNS server addresses, and enters the DNS
address or addresses provided by your ISP, then click OK.
Internet Access
To configure your PCs to use the Wireless Router for Internet access:
 Ensure that the ADSL modem, DSL modem, Cable modem, or other permanent connection is functional.
 Use the following procedure to configure your Browser to access the Internet via the LAN, rather than by a
Dial-up connection.
For Windows 2000
1. Select Start menu  Settings  Control Panel  Internet Options.
2. Select the Connection tab, and click the Setup button.
3. Select "I want to set up my Internet connection manually, or I want to connect through a local area
network (LAN)" and click Next.
4. Select "I connect through a local area network (LAN)" and click Next.
5. Ensure all of the boxes on the following Local area network Internet Configuration screen are unchecked.
6. Check the "No" option when prompted "Do you want to set up an Internet mail account now?"
7. Click Finish to close the Internet Connection Wizard Setup is now completed.
For Windows XP
1. Select Start menu  Control Panel  Network and Internet Connections.
2. Select Set up or change your Internet Connection.
3. Select the Connection tab, and click the Setup button.