Instructions / Assembly

Assembly
Recliner Assembly Instructions
Parts List
1 x Seat Back
1 x Seat
Your recliner comes packaged in one box.
DO NOT use any sharp objects to open plastic wrapped components
as damage to product or components may result.
Carefully remove all of the components from the packaging and
set aside for assembly. Assemble on a soft surface to prevent
scratching the finish.
CAUTION: Tighten all components securely
before use. Failure to do so may result in
personal injury.
Customer Support: 866-238-0531
Mon-Fri 8:00am - 4:30pm CST
[e-mail]
Step 3
Step 2
A
B
Hardware List
A
1 x Bolt
D
1 x Wing Nut
E
1/4"x 1 1/4"
1/4"
1 x Handle
C
Hardware bag can be found
under the seat
Please note the handle is
used to release the foot rest.
Use your arms to recline all
the way back. To close,
please use your legs to push
the foot rest down.
C
D
E
B
C
C
Step 1
Replaceable Parts
*
*
*
*
D
E
F
1 x Lock Washers
M6
F
*
F
Your recliner style may differ from images. Care for your furniture by periodically
tightening all bolts.
About your furniture piece:
• Softening of foam is natural and will happen over time with use.
• Fabric will fade or discolor in direct sunlight. Minimize exposure to
direct sunlight to extend the life of your furniture.
• Wood grain, knots, streaks, and color variation occur naturally in wood
and are not considered defects.
Estimated Assembly
Time in Minutes
<15 <45 60+
☆★ ☆
B
DO NOT stand up when the footrest
is in the upright position
DO NOT stand up from your
recliner with uneven weight
DO NOT stand up from your
recliner with one arm
Improper Usage
*
Carefully cut
underside
packing straps
using scissors.