Manual

13
Customer Service & Warranty
2
Customer Service & Warranty
We are committed to customer satisfaction and value your business. If at any time
during the warranty period you experience a problem with your new ProMiteOn-
Board Marine Battery Charger simply call us at 1-800-824-0524 for technical support.
PROMITE
LIMITED ONE-YEAR FACTORY WARRANTY
Each ProMite model is guaranteed against defects in material and workmanship to the original consumer in
normal use for 1 year from the date of purchase. Professional Mariner, LLC will at it's discretion repair or replace
free of charge any defects in material or workmanship. The following conditions apply:
• Warranty is calculated from manufacture date if not registered within
two weeks of sale.
• Warranty void if unauthorized repairs attempted.
• Customer is responsible for returning the product to Professional Mariner, LLC.
Inbound shipping costs must be prepaid.
• This warranty does not cover blemishes due to normal wear and tear or
damaged caused by accidents, abuse, alterations or misuse.
• Cosmetic repairs can be done at owner's request and expense.
Purchase or other acceptance of the product shall be on the condition and agreement that Professional Mariner
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. (Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply
to you.) This warranty is made in lieu of all other obligations or liabilities on the part of Professional Mariner.
Professional Mariner neither assumes nor authorizes any person for any obligation or liability in connection with
the sale of this product.
To make a claim under warranty, write directly to Professional Mariner, LLC at P.O. Box 968, Rye, NH 03870,
identifying the product and giving its locations. Follow the company’s return instructions, which will then be
provided by the company. Professional Mariner will make its best effort to repair or replace the product, if found
defective within the terms of the warranty, within (30) days after return of the product to the company. Professional
Mariner will ship the repaired, or replaced product back to the purchaser.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
This warranty is in lieu of all others expressed or implied.
Professional Mariner, LLC Headquarters
Tel: [phone] / Fax: [phone]
Factory Service Center & Technical Offices
Professional Mariner, LLC
200 International Drive STE 195
Portsmouth, NH 03801
Tel: [phone] www.promariner.com
Personal Safety Precautions Continued
Never smoke or allow a spark or a flame in the vicinity of a battery or engine.
Be extra cautious to reduce risk of dropping a metal tool onto a battery. It may spark or
short-circuit the battery or other electrical parts that may cause explosion.
Remove all personal metal items such as rings, bracelets, necklaces, watches, and jewelry
when working near a battery. A battery can produce a short circuit high enough to weld
a ring or any metal, causing serious burns.
Use the ProMite for charging lead acid and gel marine batteries only. It is not intended
to supply low voltage electrical systems other than in a marine application. Do not use
the battery charger to charge dry cell batteries that are commonly used with home
appliances. These batteries may burst and cause injury to persons and property.
Never charge a frozen battery.
Safety Precautions Prior to Charging Batteries
If necessary to remove a battery from a boat to charge, always remove grounded terminal
from battery first. Make sure all accessories in the boat are off, as to not cause an arc.
Be sure the area around the charger and batteries is well ventilated while the batteries
are being charged. Gases can be forcefully blown away using a piece of cardboard or
other nonmetallic material as a fan.
Clean battery terminals with full eye protection to prevent corrosion from coming in
contact with eyes.
Add distilled water in each cell until electrolyte reaches levels specified by the battery
manufacturer. This helps purge excessive gases from cells. Do not overfill. For batteries
without caps, carefully follow manufacturer's recharging instructions.
Study all manufacturer’s specific precautions, such as removing or not removing cell
caps while charging, in addition to rates of charge.
Extension cords should be industrial grade / heavy duty (3 pronged) U.L. approved and grounded.
Check extension cord before use for damage, bent prongs, and cuts. Replace if damaged.
Always make your extension cord connection on the charger side first. After connecting
the extension cord to the charger then proceed to plug the extension cord to a nearby
120 VAC GFCI protected (Ground Fault Circuit Interrupt) outlet.
Always remove the extension cord from the 120 VAC outlet first when charging is completed
followed by unplugging the charger.
Safety Instructions