USER MANUAL FASTTRAKS 150TX2

FastTrak S150 TX2plus User Manual

Selecting Array Type

1. Under the Definition section of this menu, highlight the Array # for which you

want to assign a RAID level.

2. Press the Spacebar to cycle through three array types:

• Performance (RAID 0 Striping)

• Security (RAID 1 Mirroring)

• RAID 0+1 Striping/Mirroring (for 4 drives)

See page 45 for more information about RAID levels.

[ Define Array Definition Menu ]

Array No RAID Mode Total Drv Status

Array 1 Stripe 2 Functional

Stripe Block: 64 KB Gigabyte Boundary: ON

[ Drive Assignments ]

Channel:ID Drive Model Assignment

1 : SEAGATE S380023AS Y

2 : SEAGATE S380023AS Y

3 : Slave WDC WD400BB-53DEA0 N

3 : Master WDC WD400BB-53DEA0 N

[ Keys Available ]

[↑] Up [↓] Down [ESC] Exit [Space] Select [Ctrl-Y] Save

Selecting Stripe Block

For RAID 0 and RAID 0+1 arrays you may manually select the stripe block size.

Press the Spacebar to scroll through choices progressing as follows (16, 32, 64,

128 KB).

The size selected affects how FastTrak S150 TX2plus sends and retrieves data

blocks to and from the drives. You will need to perform your own testing to

determine how the data block size is affecting your particular use of the array. In

general, a larger block size is better when handling large data transfers (such as

in A/V editing or graphics) while a smaller block size is better when handling e-

mail and other common server data. The default is 64 KB.