USER MANUAL FASTTRAKS 150TX2

Chapter 2: Getting Started

2. Press Ctrl-Y to Save your selection. The window below will appear.

Do you want the disk image to be

duplicated to another or do quick

initialize or create only?

Y - Create and Duplicate

N - Create Only

I - Create and Quick Initiate

Note

Gigabyte Boundary is automatically disabled when creating

a mirrored array (RAID 1) from an existing drive (versus

using two brand new drives). This protects the existing

drive’s partition table in order to maintain data integrity.

3. Press Y for the Create and Duplicate option. The window below will appear

asking you to select the Source drive to use. FastBuild will copy all data

from the Source drive to the Target drive.

Source Disk

Channel:ID Drive Model Capacity (MB)

Target Disk

Channel:ID Drive Model Capacity (MB)

[Please Select A Source Disk]

Channel:ID Drive Model Capacity (MB)

1 : SEAGATE S380023AS 80024

2 : SEAGATE S380023AS 80024

[↑] Up [↓] [ESC] Exit [Ctrl-Y] Save

4. Press the arrow keys to choose which drive contains the existing data to be

copied.

Warning

All target drive data will be erased. Make sure you choose

the correct drive.