User's Manual

107
Chapter 5: Management with WebPAM PRO
• Logging into WebPAM PRO (page 107)
• Accessing the Interface (page 110)
• Managing Users (page 116)
• Working with Subsystem/Host Management (page 120)
• Managing Software Services (page 123)
• Managing the Host (page 127)
• Managing the Subsystem (page 128)
• Managing the Controller (page 139)
• Managing Enclosures (page 145)
• Managing Physical Drives (page 146)
• Managing Disk Arrays (page 150)
• Managing Logical Drives (page 166)
• Managing Spare Drives (page 172)
• Working with the Logical Drive Summary (page 176)
This chapter describes using WebPAM PRO to monitor and manage your RAID
system. This chapter is divided into sections for major WebPAM PRO
components as shown above.
Logging into WebPAM PRO
You can log into WebPAM PRO in either of two ways:
• Logging in at the Host PC (page 107)
• Logging in over the Network (page 108)
Logging in at the Host PC
At the Host PC (where the SuperTrak EX Controller is installed), to log into
WebPAM PRO, do one of the following actions:
• Double-click the WebPAM PRO desktop icon.
• Choose WebPAM PRO in the Windows Programs menu or the Linux
Applications menu.
• Follow the steps under “Logging in over the Network” on page 108.