User's Manual

SuperTrak EX Series User Manual

108

Logging in over the Network

You can log into WebPAM PRO from any PC with a network connection to the

Host PC (where the SuperTrak EX Controller is installed).

1. Launch your Browser.

2. In the Browser address field, type the information provided below. Then

press Enter.

If you chose External SSL Security during installation (Windows, see

page 44; Linux, see page 51), use the Secure Connection. Otherwise, use

the Regular Connection.

Regular Connection

• WebPAM PRO uses an HTTP connection. . . . . . . . . . . . . . . . .http://

• Enter the Host PC’s IP address . . . . . . . . . . . . . . . . 192.168.10.228

• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8080

• Add promise to launch WebPAM PRO . . . . . . . . . . . . . . . . /promise

Together, your entry looks like this:

http://192.168.10.228:8080/promise

Secure Connection

• WebPAM PRO uses a secure HTTP connection. . . . . . . . . . .https://

• Enter the Host PC’s IP address . . . . . . . . . . . . . . . . 192.168.10.228

• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8443

• Add promise to launch WebPAM PRO . . . . . . . . . . . . . . . . /promise

Together, your entry looks like this:

https://192.168.10.228:8443/promise

Notes

• You can enter the Host PC’s network name in place of the IP

address.

• If you are logging in at the Host PC, you can enter localhost

in place of the IP address.

• Whether you select a regular or a secure connection, your

secure.