User's Manual

SuperTrak EX Series User Manual
176
Working with the Logical Drive Summary
The Logical Drive Summary displays a list of all logical drives under the
SuperTrak controller including logical drives in expanded or cascaded
enclosures. This list does not arrange the logical drives under the disk array to
which they belong nor under the enclosure in which they are located.
Logical Drive Summary includes the following functions:
• Viewing a List of All Logical Drives (page 176)
• Locating a Logical Drive (page 176)
• Viewing Individual Logical Drive Information (page 177)
Viewing a List of All Logical Drives
To view a list of all logical drives in all enclosures:
1. Click the Subsystem icon in Tree View.
2. Click the Logical Drive Summary icon.
Locating a Logical Drive
Virtual or Third Party Enclosures
Support for this feature depends on how your system or enclosure was set up.
Direct-connect systems with individual LED connections and SGPIO enclosures
support individual physical drive LEDs. Other systems or enclosures might or
might not support them. See “Appendix D: LED Backplane Connections” on
page 291.
To locate a logical drive in the enclosure, click the Locate LDx button. The LEDs
for the carriers holding the physical drives used by the logical drive will blink for
one minute.
Promise Enclosures
To locate a logical drive in the VTrak JBOD enclosure, click the Locate LDx
button. The disk status LEDs will blink for one minute to identify the carriers
holding the physical drives used by the logical drive.
Figure 9. VTrak drive carrier LEDs
Disk Status
Power/Activity