User's Manual

SuperTrak EX Series User Manual
194
Examples
config -a auto
config -a expr -ry -p y -c n -sy -t data -l2
ctrl
Usage
ctrl [-a <action>] [-i <ctrlId>] [-c <ctrl count>] [-v]
ctrl -a mod [-i <ctrlId>] -s "<list of settings>"
ctrl -a clear [-i <ctrlId>] [-t <condition type>]
Summary
The ctrl command displays controller information and changes controller settings.
Options
-a <action> Specifies the action to perform.
list (Default) Lists controller information.
mod Changes controller settings.
clear Clears controller conditions.
-i <ctrl ID> Specifies the controller ID. For subsystems with dual
controllers, controller ID is required when setting alias of
controller.
-c <ctrl count> Controller count. Required for information on multiple
controllers.
-s "<option>=<value>" Specifies which settings to change.
alias= A user-specified name for the controller.
Up to 48 characters long, alpha- numeric characters,
blank spaces and underscores. The beginning and
ending blank spaces are discarded.
Following setting is shared if there are dual controllers:
coercion= Enables or disables disk coercion. Disk coercion will
truncate the size of the physical drives. Makes different
size drives appear to be the same size. For example, a
90.1 GB drive would appear as the same size as an 89.8
GB drive. Important when using drives of different
manufacturers for rebuilds or as hot spares.
enable
disable
coercionmethod= The method of coercion.