User's Manual

Chapter 6: Management with the CLI
199
event -a clear [-l <location>]
Summary
The event command displays and clears the RAM and NVRAM event logs.
Options
-a <action> Specified the action to perform.
list Displays the events for the specified location.
RAM events are displayed if no location is specified.
clear Clear events for a specified location.
-l <location> Specifies the location from which to display or clear
events.
ram All events are stored in RAM.
These events are lost after rebooting.
nvram Some events are also stored in NVRAM.
These events remain after rebooting and are a subset of
the RAM events.
-i <sequence ID> Specifies a specific event by its sequence number. This
is a starting point. Requires the -a list option. You can
use the -c option.
-c <event count> Specifies the number of events to retrieve when
displaying events.
-v Verbose mode. Requires the -a list option.
Examples
event
event -v
event -l nvram
event -a clear -lnvram
event -c 200
event -a list -i852 -c200
export
Usage
export -t <fileType> [-s <tftpServer>] [-p <port>] -f <fileName>
Summary
The export command exports certain types of configuration files to a remote or
local host.
This command only affects subsystems.