User's Manual

Chapter 6: Management with the CLI
205
You can start, stop, pause, or resume Media Patrol and monitor its progress and
status.
Options
-a <action> Specifies the action to perform.
list (Default) Displays the status and progress of Media
Patrol.
start Starts Media Patrol.
stop Stops Media Patrol.
pause Pauses Media Patrol.
resume Resumes a paused Media Patrol.
Examples
mp
mp -a stop
mp -a resume
pdm
Usage
pdm [-a <action>] [-d <DaId>] [-s <SeqNo>]
pdm -a start -d <DaId> -s <SeqNo> -p <PdId>
pdm -a stop -d <DaId> -s <SeqNo>
pdm -a pause -d <DaId> -s <SeqNo>
pdm -a resume -d <DaId> -s <SeqNo>
Summary
The pdm command activates Predictive Data Migration (PDM). PDM replaces a
suspect physical drive, such as a drive with a PFA condition, with a different
drive. The replacement drive can be an unconfigured drive, a global spare, or a
dedicated spare to this disk array.
During PDM, the data on the suspect drive is transferred to the replacement drive
while the logical drive remains online.
After PDM, the replacement drive becomes part of the disk array. The suspect
drive become unconfigured and any PFA condition remains on it.
This command starts, stops, pauses, and resumes a PDM and monitors the
progress of a running PDM.
A PFA drive cannot be used until you clear the PFA condition. To clear the PFA
conditon of a physical drive, please refer to phydrv command on page 206.