User's Manual

SuperTrak EX Series User Manual

Installing onto Linux

For Linux PCs, Promise offers two different binary files:

• WebPAM PRO and CLI – Installs either or both WebPAM PRO and the CLI

• CLI only – Installs only the CLI

Note that both of these binary files open in a terminal window and both files use

the WebPAM PRO installer. The procedure below installs the CLI only. To install

WebPAM PRO, see page 47.

To install the CLI onto your Linux PC or server:

1. Boot the PC or server, log in as root, and launch the Linux GUI.

If the computer is already running, exit all programs. If you are not logged in

as root, log out, then log in again as root.

2. Insert the Software CD into your CD-ROM drive.

3. Copy the CLI_Installer...linux.bin file from the Software CD \CLI\Linux

directory to the /root directory on your PC.

4. Open a terminal window and type sh followed by one space, the exact name

of the CLI_Installer...linux.bin file, then press Enter.

After several moments, the first installation dialog box appears.

Important

Check the SuperTrak Read Me file for any issues pertaining to the

distribution and version of Linux OS running on your PC or server.