FastTrak TX Series User Manual

FastTrak TX2200, TX2300 User Manual
24
Make an Installation Floppy Diskette
This procedure requires one write-enabled blank 3.5-inch diskette.
1. Place your blank diskette in the appropriate drive.
2. Insert the Promise CD into your CD-ROM drive.
The display screen should open automatically.
If the display screen does not open, click on MyComputer > CD Drive D: and
double-click on the Launch.exe icon.
3. Click on the Windows Driver button.
The Disk Copy Utility opens.
4. Click the Create button in the Utility.
A confirmation box appears.
5. Click the Yes button in the confirmation box.
The utility prepares your driver installation diskette.
When the utility is finished, it displays a message.
6. In the message, click the OK button.
7. Click the Exit button to close the Promise CD.