FastTrak TX Series User Manual

FastTrak TX2200, TX2300 User Manual

Existing Installation

After installing the FastTrak TX Series RAID Controller card and rebooting your

system, Windows Server 2003 setup will show a “Found New Hardware” dialog

box. Under Windows 2003, “RAID Controller” will be displayed.

1. Insert the FastTrak driver diskette into the A:\ drive.

2. Choose Install the software automatically and press the Enter key.

3. Choose Windows Promise FastTrak TX [2200, 2300] (tm) Controller from the

list that appears on screen, and then press the Enter key.

4. If using a driver that has not been digitally signed by Microsoft, you will be

asked if you want to continue the installation. Click Continue anyway.

5. When the New Hardware Wizard has finished installing the FastTrak driver,

click Finish.

Confirm Installation

1. Right-click on the My Computer icon and select Manage from the popup

menu.

2. From the left panel, select Device Manager.

3. Click the “+” in front of SCSI and RAID controllers. “Windows Promise

FastTrak TX [2200, 2300] (tm) Controller” and “Promise RAID Console SCSI

Processor Device” should appear.