VTRAK M-CLASS Product Manual

Chapter 2: Installation
27
There are two LEDs on each Drive Carrier. They report the presence of power
and a disk drive, and the current condition of the drive.
Figure 16.VTrak M500f/i/p drive carrier LEDs
Figure 17.VTrak M300f/i/p and M200f/i/p drive carrier LEDs
After a few moments the Power/Activity should display Green.
If there is no disk drive in the carrier, the Disk Status LED and the Power/Activity
LED will remain dark.
When you first power-up the VTrak, the audible alarm beeps twice to show
normal operation.
Go to “Chapter 3: Setup” on page 29.
Disk Status
Power/
Activity
Disk Status
Power/Activity