Manualshelf

VTRAK M-CLASS Product Manual

ManualsBrandsPromise Technology ManualsNetwork CardVTrack M-Class M300i
41424344454647484950
Chapter 3: Setup
33
5. Press Ctrl-A to save these settings and move to the Management Port
configuration screen.
Management Port
By default, DHCP is enabled on VTrak (above). To set Management Port settings
manually, or to view the current settings, you must disable DHCP.
To view the current Management Port settings:
1. Press the arrow keys to highlight DHCP.
2. Press the spacebar to toggle to Disabled.
The current Management Port IP are displayed (above).
3. Record the information on this screen.
4. Press the spacebar to toggle DHCP back to Enabled.