Owners manual

Page 10
ASSEMBLY INSTRUCTIONS
WARNINGS
 Adequate overhead clearance is essential. A minimum of 24 ft from ground level is
recommended. Provide clearance for wires, tree limbs, and other possible hazards.
 Lateral clearance is essential. Place the trampoline and trampoline enclosure away
from walls, structures, fences, and other play areas. Maintain a clear space on all sides
of the trampoline and trampoline enclosure.
 Place the trampoline and trampoline enclosure on a level surface before use.
 Use the trampoline and trampoline enclosure in a well-lit area. Artificial illumination
may be required for indoor or shady areas.
 Secure the trampoline and trampoline enclosure against unauthorized and
unsupervised use.
 Remove any obstructions from beneath the trampoline and trampoline enclosure.
 The trampoline enclosure is only to be used as an enclosure for a trampoline of a size
for which the enclosure is designed.
 The owner and supervisors of the trampoline and trampoline enclosure are responsible
to make all users aware of practices specified in the use instructions.
 The trampoline and enclosure combination should not be installed or used on
concrete, asphalt, or other similarly hard surfaces. Using your trampoline and
enclosure combination in such locations can increase the likelihood of injury when
entering or exiting your trampoline.
IMPORTANT ASSEMBLY INFORMATION
 You will need a Phillips screw driver (not included), and an adjustable wrench (not
included) to assemble this Trampoline and Enclosure Combination.
 Assembly requires two adults.
 Wear gloves to protect your hands from pinch points during assembly.
 To extend the life of your product, a thin film of oil has been applied to all metal parts.
Therefore, you should wear clothing and gloves, during assembly, which will not be
damaged by any slight oil residue or stain. When product is completely assembled, all
metal parts with oil film will be covered.