Owners manual

Page 12
Step 2 - Slide two Leg Tubes (C) onto a Leg Brace (D). One leg of each pair should have a
Safety Sticker attached. The peak of the Brace (D) should point toward the ground.
Insert one of the Leg Tubes (C) into one of the T-Brackets (which were previously
assembled in Step One). Insert the other Leg into the other T-Bracket. Press down on both
Legs at the same time to ensure that they are fully inserted into the Sockets.
Repeat Steps 1 and 2 until all Legs are assembled for your Trampoline.
Note: You may need to pull outward on the Legs (C) as you insert them into the Sockets.
This step was intentionally designed to keep your Trampoline tightly assembled.