Owners manual

Page 14
Enclosure Post Assembly
Read and understand all assembly instructions before beginning the assembly process.
Your Trampoline’s Enclosure Posts come in two sections, an upper
(curved) and a lower (straight) section.
Step 1 – Connect one Upper Post section and one Lower Post section
together, making sure to match the screw holes in the two sections. See
figure right.
Step 2 – Secure the Posts with a Screw in the center hole and slide the
Foam Sleeves together to cover the screw.
Caution: Do not over-tighten the Screw or the
hole will be stripped out.
Repeat steps 1 and 2 until you have assembled all of the
Enclosure Poles, then set them aside for use in later steps.