Owners manual

Page 17
Step 7 – Your Enclosure should now be
hanging loosely from the Enclosure Poles,
with the Zippered Opening centered between
two Enclosure Poles. Locate the Spring Slot
directly below the Zipper along the bottom
edge of the Enclosure. Feed the short end of
a Spring through it and attach to the V-Ring
to the left of the T-Bracket and the
previously attached Spring. Pull the Spring
back towards the Frame and insert the long
end into the slot in the Frame. (See
illustrations.)
Step 8 – Work your way around the Trampoline attaching one Spring to the left of each T-
Bracket, as shown above. As the Enclosure can bunch up, you will need to count the V-Rings
on the Mat, and the Spring Slots in the Enclosure and the Frame, to ensure that the Enclosure
is evenly stretched, and that you are attaching the Spring in the correct location.
One spring attached through the enclosure and the other
attached directly to the mat