Owners manual

Page 19
Safety Pad Assembly
Read and understand all assembly instructions before beginning the assembly process.
Step 1 – Lift the Enclosure
Poles out of the T-Bracket
slots and lean them forward
so they are resting on the
Mat.
Step 2 – Unfold the Safety
Pad so it is resting on the
Frame and Springs.
Step 3 – Rotate the Pad so that the logo
sits approximately in front of the zipper
and the holes in the Pad align with the
Enclosure Pole slots on the T-Brackets.
Note: Securely attaching and positioning the
Frame Padding is essential to the safety of
your Trampoline. Check to ensure the Frame
Pad is correctly positioned before each use.
The Frame Pad should be positioned so that it
covers the entire Spring and Frame area. See
figure right.