Manualshelf

Product Manual (Installation and Assembly)

ManualsBrandsPropel Trampolines ManualsBackyard PlayKinetic 12' Round Backyard Trampoline with Safety Enclosure
12345678910
Page 10
ASSEMBLY INSTRUCTIONS
WARNINGS
• Adequate overhead clearance is essential. A minimum of 24 feet from ground level is
recommended. Provide clearance for wires, tree limbs, and other possible hazards.
• Lateral clearance is essential. Place the trampoline and trampoline enclosure net away
from walls, structures, fences, and other play areas. Maintain a clear space on all sides
of the trampoline and trampoline enclosure net.
• Place the trampoline and trampoline enclosure net on a level surface before use.
• Use the trampoline and trampoline enclosure net in a well-lit area. Artificial
illumination may be required for indoor or shady areas.
• Secure the trampoline and trampoline enclosure net against unauthorized and
unsupervised use.
• Remove any obstructions from beneath the trampoline and trampoline enclosure net.
• The trampoline enclosure net is only to be used as a safety enclosure net for a
trampoline of the size for which the enclosure net is designed.
• The owner and supervisors of the trampoline and trampoline enclosure net are
responsible to make all users are aware of practices specified in the user manual.
• The trampoline and enclosure net combination should not be installed or used on
concrete, asphalt, or other similarly hard surfaces. Using your trampoline and enclosure
net combination in such locations can increase the likelihood of injury when entering
or exiting your trampoline.
IMPORTANT ASSEMBLY INFORMATION
• You will need a Phillips Screwdriver (not included), and an adjustable wrench (not
included) to assemble this trampoline and enclosure net combination.
• Assembly requires two adults.
• Wear gloves to protect your hands from pinch points during assembly.
• To extend the life of your product, a thin film of oil has been applied to all metal parts.
Therefore, you should wear clothing and gloves during assembly which will not be
damaged or stained by any slight oil residue. When the trampoline is completely
assembled, all metal parts with oil film will be covered.