Product Manual (Installation and Assembly)

Page 11
Frame Assembly
Read and understand all assembly instructions before beginning the assembly process.
Your trampoline frame is assembled using two types of t-brackets; type A (regular t-brackets)
and type B (enclosure t-brackets). The enclosure t-bracket includes a special slot to insert an
enclosure pole. Each t-bracket has been pre-attached to a frame piece.
Step 1- Select one frame piece with a type A t-bracket and another with a type B t-bracket.
Insert the crimped end of the frame piece with the type A t-bracket into the opening of the
type t-bracket and place on ground with the spring holes facing down.
Step 2 - Slide two leg tubes (C) onto a leg brace (D). One leg of each pair should have a
N
ote:
Make sure the crimped end of the frame piece passes completely through the t-
bracket and into the end of the adjoining frame piece.