Product Manual (Installation and Assembly)

Page 12
safety sticker attached. The peak of the brace (D) should point toward the ground.
Insert one of the leg tubes (C) into one of the t-brackets (which were previously assembled
in step one). Insert the other leg into the other t-bracket. Press down on both legs at the
same time to ensure that they are fully inserted into the sockets.
Repeat steps 1 and 2 until all of the legs are assembled for your trampoline.
Note: You may need to pull outward on the legs (C) as you insert them into the sockets. This
is designed to keep your trampoline tightly assembled.
Step 3 – Rotate two leg sections so the spring holes are facing up and hold them in the