Product Manual (Installation and Assembly)

Page 14
Read and understand all assembly instructions before beginning the assembly process.
Your trampoline’s enclosure poles come in two sections; an upper
(curved) and a lower (straight) section.
Step 1 – Connect one upper pole section and one lower pole section
together, making sure to match the screw holes in the two sections. See
the figure to the right.
Step 2 – Secure the poles with a screw in the center hole and slide the
foam sleeves together to cover the screw.
Caution: Do not over-tighten the screws or the
hole will be stripped out.
Repeat steps 1 and 2 until you have assembled all of the
enclosure poles; then set them aside for use in later steps.
Jumping Mat and Enclosure Net