Product Manual (Installation and Assembly)

Page 19
Safety Pad Assembly
Read and understand all assembly instructions before beginning the assembly process.
Step 1 – Lift the enclosure
poles out of the t-bracket
slots and lean them forward
so they are resting on the
jumping mat (as shown in the
picture to the left).
Step 2 – Unfold the safety
pad so it is resting on the
frame and springs.
Step 3 – Rotate the pad so that the logo
sits approximately in front of the zipper
and the holes in the pad align with the
enclosure pole slots on the t-brackets.
Note: Securely attaching and positioning the
frame padding is essential to the safety of your
trampoline. Check to ensure the frame pad is
correctly positioned before each use. The frame
pad should be positioned so that it covers the
entire spring and frame area (as shown in the
figure to the right).