Product Manual (Installation and Assembly)

Page 20
Step 4 –Locate the spring loops on the
underside of the pad. Find the spring
nearest to the spring loop and unhook it
from the frame. Insert the spring through
the spring loop, and reattach it to the
frame. Repeat this step until all spring
loops have been attached.
Step 5 – Lift the enclosure poles and insert them through the hole in the pad and into the t-
bracket slot.
Step 6 – Secure the Enclosure Poles to the Frame by
attaching the included Bolts through the T-Brackets.
NOTE: Foam sleeves covering the enclosure poles may require a few warm days to fully
return to their original round shapes after being flattened during the shipping process.
Similarly, any folds or creases in the spring pad, jumping mat, or enclosure net should
disappear within a short time.
Make sure that all parts are securely attached. Familiarize
yourself and all users of the trampoline and trampoline
enclosure net combination with all safety precautions. Use
the instructions, care, and maintenance materials in this manual before
using the trampoline.