User manual

15
1. Sliding the “Power” toggle switch to “on” position
2. Press “SETUP” button
3. Connect the TV cable to the camera and TV
4. Then the LCD will display “TV”
5. Then the real time image will be transfer to the TV
10. Glossary
PIR: Passive Infrared Sensor. Senses motion like a typical security motion detector. Requires
infrared energy (heat) in addition to motion to trip the sensor and assure detection of live
animals.
Camera Delay: Time elapsed between photos while events are sensed and recorded. This is
user-set based on wildlife activity in area.
Resolution: The resolution selection that you have selected. MP = Mega Pixels = 1 million pixels
HI (2560 x 1920): 5.0M pixels image. (High image quality, big file size)
LO (2048 x 1536): 3.1M pixels image. (Medium image quality, medium file size)
Video resolution (640 x 480@30fps): This is the resolution during video capturing.
FPS: Frame per second. This is the measurement of the frequency (rate) at which an imaging
device produces unique consecutive images. 30 fps means that the camera produces video at 30
frames per second. The higher the fps, the smoother and more fluent the video.
Movie Length: This camera takes all movies at 15 seconds’ length.
Password: It controls the permission of using this camera. Password length is 4 digits.
Moon Phase Imprint: Enables the imprinting of the moons cycle on your photos.
Temperature Imprint: This camera equips the temperature sensor which will imprint the
temperature data on each photo.
IR Flash: Also called IR LED Array. Infrared LED Night Vision feature Emits a burst of infrared light
which is invisible to the human eye. Especially useful for night photos when a visible flash is
undesirable.
SD Card: Memory card used to store images and events. The camera is compatible SD memory
cards up to 32GB capacity.
Battery Life: Time that camera will function in the field. Dependent on temperature, number of