PROTECTA PRO 3 ANSI/ASSE Z359.
Models 1161315 - 1161317 1161308 - 1161314 1161400 - 1161403 1161315 4 4 4 4 4 √ 1161401 √ √ √ 1161403 √ √ √ √ 1161411 1161404 - 1161406 5 2 1161410 - 1161412 1161413 - 1161416 2 5 √ √ √ √ 1161415 4 4 √ 1161416 1161417 √ √ √ 1161419 1161420 √ √ 1161421 1161420 - 1161422 1161417 - 1161419 1161423 - 1161425 2 2 1161423 2 √ √ 1161422 √ √ 1161424 √ √ 1161425 1161426 √ √ √ 1161430 √ √ 1161431 √ 1161432 1161426 - 1161428 2 1161429 - 1161432 1161433 - 1161435 √ √
Models 1161506 - 1161509 1161500 - 1161505 1161510 - 1161516 2 3 3 √ 4 4 √ √ √ √ 1161515 √ 1161516 √ √ 1161518 √ 1161519 1161520 1161520 - 1161523 1161517 - 1161519 1161524 - 1161530 5 2 3 1161531 1161531 - 1161540 1161541 - 1161552 1161553 - 1161555 2 3 1161538 4 1161541 √ √ √ √ √ √ √ √ 1161546 3 2 2 2 √ √ √ √ √ √ 1161550 4 4 4 √ 1161548 1161549 4 √ 1161553 √ √ √ √ √ 1161555 1161556 √ √ 1161557 √ √ 1161558 1161559 √ √ 1161560 √ √ 1161561 √ 1161562
Models 1161570 - 1161579 1161570 √ √ √ 1161571 √ √ 1161572 √ 1161573 1161576 1161577 1161578 1161579 √ √ 7 √ √ √ Hip Quick Connect Tongue Buckle 8 9 10 Shoulder Pads 6 Pass-Thru 5 Belt & Hip Pad 4 Shoulder 3 Sternal Personal SRD Loop 2XL √ 1161568 2 Attachment Elements Size 1161569 2 3XL LG XL 12 1 11 MED 8 1 SM 7 Dorsal 1 6 Buckles √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ Belt & Pads
2 A B C D 3 E F 4 A B B FC C C FC 5 A 6 B C 7 A B 5 C
8 B A C 9 1 2 A 3 CL IC K! A B C B 6 D
10 A B 11 A B C D 7
12 1 2 3 4 5 6 8
13 A A A A 9
EN SAFETY INFORMATION Please read, understand, and follow all safety information contained in these instructions prior to the use of this Full Body Harness. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH. These instructions must be provided to the user of this equipment. Retain these instructions for future reference. Intended Use: This Full Body Harness is intended for use as part of a complete personal fall protection system.
Before using this equipm ent, record the product identifi cation inform ation from the I D label in the “ I nspection and Maintenance Log” at the back of this m anual. DESCRI PTI ON Figure 1 defines available Protecta Pro 3™ Full Body Harness models.
1 .0 APPLI CATI ON S 1.1 PURPOSE: Full Body Harnesses are to be used as components in Personal Fall Protection System designed to prevent a fall or safely arrest a fall (see Figure 2). Full Body Harnesses are used in the following applications: A Fall Arrest: Personal fall arrest systems typically include a Full Body Harness and a connecting subsystem (Energy Absorbing Lanyard, Self-Retracting Device, etc.). Maximum arresting force must not exceed 1,800 lbs (8 kN).
2 .0 SYSTEM USE 2.1 RESCUE PLAN: When using this equipment and connecting subsystem(s), the employer must have a rescue plan and the means at hand to implement and communicate that plan to users3, authorized persons4, and rescuers5. 2.2 INSPECTION FREQUENCY: The Full Body Harness shall be inspected by the user before each use and by a competent person6 other than the user at intervals of no more than one year7. Inspection procedures are described in the “ I nspection and Maintenance Log” .
3 .0 HARN ESS USE 3.1 BEFORE EACH USE of this equipment inspect it according to the “ I nspection and Maintenance Log” ( Table 1). 3.2 PLAN your system before use. Consider all factors that will affect your safety during use of this equipment. The following list gives important points to consider when planning your system: 3.3 • Anchorage: Select an anchorage capable of sustaining the Static Load requirements of the intended fall protection application (see Section 1.1).
5. Buckle and adjust the Chest Strap (see Section 3.3 for buckle operation). The Chest Strap should be 6 in. (15 cm) down from the top of your shoulders. When properly adjusted, tuck the loose end of the Chest Strap under the Strap Keeper. 6. Adjust the Shoulder Straps for a Snug Fit with the Torso Adjusters (see Section 3.4 for Torso Adjuster operation). Left and right sides of Shoulder Straps should be adjusted to the same length and the Chest Strap should be centered on your lower chest, 6 in.
Table 1 – Inspection and Maintenance Log Serial Number(s): Date Purchased: Model Number: Date of First Use: Inspection Date: Inspected By: Component: Inspection: ( See Sect ion 2 .2 for I nspect ion Frequency) User Harness Hardware (Diagram 1) Inspect harness hardware including buckles (1), adjusters (2), D-rings (3), PSRL Loop (4), loop keepers (5), lanyard parking (6), etc.
ANSI/ASSE Z359.11-2014 American National Standard Annex A ANSI/ASSEE Z359 Requirements for Proper Use and Maintenance of Full Body Harnesses N OTE: These are general requirem ents and inform ation provided by ANSI / ASSE Z359, the Manufacturer of this equipm ent m ay im pose m ore stringent restrictions on the use of the products they m anufacture, see the Manufacturer’s instructions. 1.
ANSI/ASSE Z359.11-2014 American National Standard Annex A ANSI/ASSEE Z359 Requirements for Proper Use and Maintenance of Full Body Harnesses 12. Frontal – the frontal attachment serves as a ladder climbing connection for guided type fall arresters where there is no chance to fall in a direction other than feet first, or may be used for work positioning.
ADDI TI ON AL HARN ESS MODELS: Additional Protecta Harness models not listed in Figure 1, but covered by this Instruction Manual are as follows: 1191200 1191200C 1191201 1191201C 1191201CH 1191201H 1191202 1191202C 1191203 1191203C 1191203CH 1191204 1191204C 1191205 1191205C 1191205CH 1191206 1191206C 1191207 1191207C 1191208 1191208H 1191209 1191209H 1191210 1191210H 1191211 1191212CH 1191212H 1191213CH 1191213H 1191214CH 1191214H 1191215 1191215C 1191216 1191216C 1191216CH 1191217 1191217C 1191218 1191218
U.S. PRODUCT W ARRAN TY, LI MI TED REMEDY AN D LI MI TATI ON OF LI ABI LI TY W ARRAN TY: THE FOLLOWI NG I S MADE I N LI EU OF ALL WARRANTI ES OR CONDI TI ONS, EXPRESS OR I MPLI ED, I NCLUDI NG THE I MPLI ED WARRANTI ES OR CONDI TI ONS OF MERCHANTABI LI TY OR FI TNESS FOR A PARTI CULAR PURPOSE.