ORiNOCO® AP- 9200R (Outdoor Access Point) Safety & Regulatory Guide
Copyright © 2021 Proxim Wireless Corporation, San Jose, CA. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634; 5,875,179; 6,006,090; 5,809,060; 6,075,812; 5,077,753. The content described herein are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Proxim Wireless Corporation.
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 AP-9200R - Regulatory Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Information (USA,Canada and European Union) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Federal Communications Commission (FCC) Compliance . . . . . . . . . . . . . . . . . . . . . .
Preface Preface About this Guide This document contains the safety and regulatory compliance information for the following ORiNOCO® products: • ORiNOCO® Outdoor Access Point – AP-9200R Related Documents In addition to this guide, you can refer to the following documents that are available on the Proxim’s support site at http://my.proxim.com. • Quick Installation Guide (QIG): A quick reference guide that provides essential information for installing and configuring the device.
AP-9200R - Regulatory Information This chapter contains information on the following: • Safety Information (USA,Canada and European Union) • Federal Communications Commission (FCC) Compliance • Industry Canada Compliance • Certification Summary 1 1.
AP-9200R - Regulatory Information 1.2 Federal Communications Commission (FCC) Compliance The ORiNOCO® devices comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
AP-9200R - Regulatory Information 1.2.2 FCC Radiation Exposure Statement The ORiNOCO® devices comply with FCC radiation exposure limits set forth for an uncontrolled environment. Tabulated below are the products and the FCC radiation exposure limits followed by the devices: Product(s) AP-9200R • • Standards Product models using external antennas require professional installation.
AP-9200R - Regulatory Information • Under Industry Canada regulations, the radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
AP-9200R - Regulatory Information Frequency Band Antenna Type (5.270 - 5.720) GHz / (5.470-5.725) GHz / (5.745-5.825) GHz (5.745 - 5.825) GHZ Frequency Band (2.400 - 2.4835) GHz / (2.41 - 2.462) GHz Maximum Gain (dBi) Panel 29.5 Sector 21 Omni Directional 13 Parabolic Dish 34 Antenna Type Maximum Gain (dBi) Sector 18 Omni Directional 13 1.3.1 IC Radiation Exposure Statement This device complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
AP-9200R - Regulatory Information 1.4.2 5 GHz Operation The installer must use the configuration utility provided with the device to ensure the channels of operation are in conformance with the spectrum usage rules. The device employs a radar detection feature required for European Community and EFTA country operation in the 5 GHz band. This feature is automatically enabled when the country of operation is correctly configured for any European Community or EFTA country.
2 Information for Professional Installer This chapter contains information on the following: • Information for Professional Installers – Adjusting Tx Output Power – Antenna Gain Configuration 2.1 Information for Professional Installers All products must be professionally installed, and the transmit power of the system must be adjusted by the professional installers to ensure that the system EIRP is in compliance with the limit specified by the regulatory authority of the country of application. 2.1.
Information for Professional Installer United States1 (5.3, 5.4 GHz) 5250 ~ 5350 (DFS) 30 30 53 36(End Point A), 53(End Point B) 53 36(End Point A), 53(End Point B) 5500 ~ 5600 (DFS) 5650 ~ 5725 (DFS) United States2 (5.3, 5.8 GHz) 5250 ~ 5350 (DFS) 5725 ~ 5850 (Non-DFS) United States3 (5.2, 5.
Information for Professional Installer 2.1.2 Antenna Gain Configuration When using external antenna, the professional installer should ensure to configure proper antenna gain so that the radio does not exceed the EIRP allowed per regulatory domain. Calculate the antenna gain as follows: Antenna Gain to be configured = Antenna Gain of the antenna used - Cable Loss Example: Consider an example where the device is operating in United States 5.3 GHz with the EIRP 30 dBm.
Canada - Certification Given below are the Industry Canada certification details for the following product: • A AP-9200R ORiNOCO® AP- 9200R - Safety and Regulatory Guide 14
Canada - Certification ORiNOCO® AP- 9200R - Safety and Regulatory Guide 15
Canada - Certification ORiNOCO® AP- 9200R - Safety and Regulatory Guide 16
Canada - Certification ORiNOCO® AP- 9200R - Safety and Regulatory Guide 17
Canada - Certification ORiNOCO® AP- 9200R - Safety and Regulatory Guide 18
USA - Certification Given below are the USA certification details for the following product: • B AP-9200R ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 19
USA - Certification ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 20
USA - Certification ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 21
ETSI - Certification C Given below is the product with the ETSI Certification: • AP-9200R ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 22
ETSI - Certification ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 23
ETSI - Certification ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 24
UL - Certification Given below is the product with the authorization to use UL Mark: • D AP-9200R ORiNOCO® AP- 9200R - Safety and Regulatory Guide 25
UL - Certification ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 26
UL - Certification ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 27
CB - Test Certificate Given below is the CB Test certification for the following product: • E AP-9200R ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 28
CB - Test Certificate ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 29
CB - Test Certificate ORiNOCO ® AP- 9200R - Safety and Regulatory Guide 30
