user manual

Tsunami MP.11 Installation and Management
Chapter 5. Web Interface
This section covers the Web Interface of the MP.11. The interface is described hierarchically
according to the buttons on the left side of the Web page:
Status
Configure
Monitor
Commands
For an introduction to the basics of MP.11 management, see “Chapter 4. Basic Management” on
page 24.
STATUS
The Status tab is displayed automatically when the user logs into the Web Interface. It can also be
accessed by clicking the Status button on the left side of the window.
The Status tab shows the System Status and the System Traps.
System Status
In this section, the basic system status is shown, including the version number of the embedded
software.
Chapter 5. Web Interface 37
CPN 63708 Issue Date: 02/05/2003