user manual

Tsunami MP.11 Installation and Management
Systems Traps
This section shows the status of system traps. System traps occur when the MP.11 encounters
irregularities. Deleting system traps has no effect on the operation of the MP.11. System traps
are also sent to an SNMP manager station (if so configured).
CONFIGURE
Use the Configure section to change the settings of the MP.11. There are nine tabs in this section.
1) System
Click Configure Î System.
In this section, you can enter or view the basic system information. These settings do not influence
the operation of the MP.11, with the exception of System Mode. System Mode sets the MP.11 as
bridge (layer 2) or as router (layer 3). See on page 27 for more information.
Chapter 5. Web Interface 38
CPN 63708 Issue Date: 02/05/2003