user manual

Tsunami MP.11 Installation and Management
Point-to-Multipoint Network
If you want to connect more than two buildings, you can set up a single Point-to-Multipoint network
with a single Base interface and multiple Satellite interfaces, as depicted in the following figure.
In this figure, the system is designed as follows:
▪ The central building b is equipped with a Base interface, connected to either an omni-directional,
or a wide angle antenna.
▪ The two other buildings a and c are both equipped with a Satellite interface connected to a
directional antenna.
Chapter 1. Overview 6
CPN 63708 Issue Date: 02/05/2003