Specifications
Psion Teklogix 7535 G2 Hand-Held Computer Quick Reference Guide 23
1.4.1 Installing The Battery
•Slide the charged battery with the contoured plastic facing
you into the 7535 G2.
• Click the battery into place.
1.4.2 Battery Swap And Runtime
Important: Always switch the unit off before changing the bat-
tery. While the battery is being replaced, the 7535 G2
will save its current data for at least 20 minutes.
The 7535 G2 battery will operate for 8 hours under typical operating
conditions after a full charge. Typical battery life is 300 charge
cycles or 2 years average use. A full charge is completed in 4 hours
with a typical charge time of 1.5 hours.
1.5 Switching The 7535 G2 On
• Press and hold down [ENTER] for at least one second.
• When all four LEDs flash yellow, release the [ENTER] key.