user manual

106Web
Viewing HTML sourceViewing HTML source
Viewing HTML sourceViewing HTML source
Viewing HTML source
You can use Web to look at the HTML ‘source code’ of Web
pages you have retrieved. This may be useful if you are
interested in creating your own HTML pages and want to see
how an effect is achieved.
To view the source of the current page:
1. Select Show page source on the Tools menu.
2. Web will display the HTML source. This may require a
connection to the Internet if you aren’t connected.
3. Once the HTML source code has been retrieved, you can
view and edit it. Use the Save as button or select the Save
as command from the More command in the File menu to
save the HTML text as a “.HTML” file on your netBook.
To view the Web page as normal:
• Tap the Done button on the Toolbar or select Show page
source on the Tools menu again to remove the tick.
Using plug-insUsing plug-ins
Using plug-insUsing plug-ins
Using plug-ins
Plug-ins are programs you can use with Web to add new features
and capabilities for browsing the Internet. You will be able to find
Web plug-ins by searching for them on the Internet.
To add a plug-in:
Select the plug-in installation file in the System screen, then tap
on it again to install it.
Some plug-ins can require a considerable amount of memory,so
you may want to turn them off when you are not using them.
To do this:
1. Select General preferences on the Tools menu and tap on
the Plug-ins page.
2. Select the plug-in you want to turn off, and tap the On/Off
button. To turn a plug-in back on, select it and tap the On/
Off button again.