user manual

137Time

• If you scroll through the countries, only the capital cities are

listed. If you wish to view only the cities in one particular

country, select the country, and then select the Cities in

current country command from the View menu. Togo

back to displaying cities for all countries, reselect the

command.

When you select a city, the cross hairs on the map move to the

selected city, and information about the city appears at the

bottom of the screen.

• The time difference between the Home city and selected

city is displayed. This includes the difference in “GMT

(Greenwich Mean Time) offsets” (the time zone difference)

and includes a correction for summer time if necessary. For

information about summer times, refer to ‘Setting summer

time’ later.

• The code next to the telephone symbol at the bottom of

the screen shows the digits needed to dial the selected city

from the Home city.

dding a town or citydding a town or city

dding a town or city

If a place you require is not included in the Map view, you can

add it:

1. Select the Add city command from the Edit menu.

2. Type the name of the city, its country, the latitude and

longitude if known (this allows accurate distances and

sunrise and sunset times to be calculated), the telephone

area code, the GMT offset, and ‘Summer time zone’ (see

‘Setting summer time’ later in the chapter).

3. Position the intersection of the cross hairs on the town or

city location, using the pen or the arrow keys.

You can select the command from the Edit menu to

subsequently change any of the city details.

You can only delete a non-capital city that you have added to the

map yourself.To do this, select it at the bottom of the screen and

then select the appropriate command from the Edit menu.