user manual

PsiWin 167
Getting connectedGetting connected
Getting connectedGetting connected
Getting connected
Connecting the cableConnecting the cable
Connecting the cableConnecting the cable
Connecting the cable
As your netBook can communicate with various devices, you
need to make sure that the communications link setting on your
netBook is set correctly to communicate with your PC using
PsiWin.
• Move to the System screen. Select link to desktop from
the Tools menu and select the cable setting.
The cable is used by your netBook and PC to communicate. To
connect the cable:
1. Locate the COM port (or serial port) on your PC, usually
found at the rear of your computer. Insert the larger
connector on the cable into the port on your PC.
2. Locate the serial port on your netBook and insert the
smaller connector into the port.
Note: If you have difficulty connecting the cable to your
netBook, you may be attempting to insert the connector upside
down. You should not have to apply force when inserting the
connector into the port on your netBook.
Further help: See the on-line Help for more details on how to
connect your PC and netBook, and troubleshooting information
to help you solve any problems.
If you have a docking station, you can connect your cable to it.
Connection is made each time you place your netBook in it.
Connecting via Infrared
It is also possible to connect using infrared if your PC is IR
equipped. To do this, select “Infrared” from the link to desktop
menu. After ensuring that the PC is configured to use IR, line up
the two IR ports, and connect.
Open flapOpen flap
Open flapOpen flap
Open flap
RS232
AttachAttach
AttachAttach
Attach
connectorconnector
connectorconnector
connector